Sewing Skills, Intermediate - 10 hours

Please see the notes below for a list of supplies needed for this class.  Fox Valley Technical College reserves the right to cancel a class due to low enrollment up to two days in advance of the class start date and refunds will be given.  Please take this into consideration when purchasing supplies needed for this class.

Thank you for registering for a Fox Valley Technical College class. It will be held at Faith United Methodist Church - Neenah located at 1025 Tullar Road, Neenah in Room 106.

Students will be attending only the first and third classes of a three day session class from 9:00 a.m. to 2:00 p.m. 

Required supplies: sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including desired project, pattern notions, preshrunk fabric and thread to complete your project, sharp cutting shears, scissors for trimming, rotary cutter, seam ripper, stick pins or long, white-headed pins (1 3/8”), pin cushion, scotch tape, small ruler, vinyl tape measure that is easy to read; needles, fabric scraps for testing stitches, sewing gauge, highlighter and pad of paper and pencil for note taking.  Please note: a rotary cutter is included in the above supply list as these are never supplied in the classroom.

Project ideas will be presented.

Sewing Skills Intermediate is a project-based class.  Each week the instructors present a sewing/serger/quilting project, with demonstration, that the students may choose to do.  Students may also work on projects of their own choosing.  The class is designed to increase students' sewing skills and knowledge of sewing/serger machine operation.

A limited number of sewing machines, sergers, cutting mats, iron stations and quilter’s rulers are available in the classroom for student use. If you wish to use sergers, an introductory class in serging is a prerequisite.  If you are bringing your own machine, please make sure it is in good worked order (with power cord and accessories). If you will be using a rotary cutter, please bring that also.
If you will be in class all day, you may want to bring a bag lunch and beverage.

If you have any questions on the class or supplies, please contact instructors Joan Sachs at jpsachs13@gmail.com or cell # (920) 740-5278 or Ginger Dean at buzz87@new.rr.com or home # (920) 739-1395 or cell # (920) 585-1113.

Please see the notes below for a list of supplies needed for this class.  Fox Valley Technical College reserves the right to cancel a class due to low enrollment up to two days in advance of the class start date and refunds will be given.  Please take this into consideration when purchasing supplies needed for this class.

Thank you for registering for a Fox Valley Technical College class. It will be held at Faith United Methodist Church - Neenah located at 1025 Tullar Road, Neenah in Room 106.

Students will be attending only the first two classes of a three day session class from 9:00 a.m. to 2:00 p.m. 

Required supplies: sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including desired project, pattern notions, preshrunk fabric and thread to complete your project, sharp cutting shears, scissors for trimming, rotary cutter, seam ripper, stick pins or long, white-headed pins (1 3/8”), pin cushion, scotch tape, small ruler, vinyl tape measure that is easy to read; needles, fabric scraps for testing stitches, sewing gauge, highlighter and pad of paper and pencil for note taking.  Please note: a rotary cutter is included in the above supply list as these are never supplied in the classroom.

Sewing Skills Intermediate is a project-based class.  Each week the instructors present a sewing/serger/quilting project, with demonstration, that the students may choose to do.  Students may also work on projects of their own choosing.  The class is designed to increase students' sewing skills and knowledge of sewing/serger machine operation.

A limited number of sewing machines, sergers, cutting mats, iron stations and quilter’s rulers are available in the classroom for student use. If you wish to use sergers, an introductory class in serging is a prerequisite.  If you are bringing your own machine, please make sure it is in good worked order (with power cord and accessories). If you will be using a rotary cutter, please bring that also.

If you will be in class all day, you may want to bring a bag lunch and beverage.

If you have any questions on the class or supplies, please contact instructors Joan Sachs at jpsachs13@gmail.com or cell # (920) 740-5278 or Ginger Dean at buzz87@new.rr.com or home # (920) 739-1395 or cell # (920) 585-1113.

Please see the notes below for a list of supplies needed for this class.  Fox Valley Technical College reserves the right to cancel a class due to low enrollment up to two days in advance of the class start date and refunds will be given.  Please take this into consideration when purchasing supplies needed for this class.

Thank you for registering for a Fox Valley Technical College class. It will be held at Faith United Methodist Church - Neenah located at 1025 Tullar Road, Neenah in Room 106.

Students will be attending only the second and third classes of a three day session class from 9:00 a.m. to 2:00 p.m.

Required supplies: sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including desired project, pattern notions, preshrunk fabric and thread to complete your project, sharp cutting shears, scissors for trimming, rotary cutter, seam ripper, stick pins or long, white-headed pins (1 3/8”), pin cushion, scotch tape, small ruler, vinyl tape measure that is easy to read; needles, fabric scraps for testing stitches, sewing gauge, highlighter and pad of paper and pencil for note taking.  Please note: a rotary cutter is included in the above supply list as these are never supplied in the classroom.

Sewing Skills Intermediate is a project-based class.  Each week the instructors present a sewing/serger/quilting project, with demonstration, that the students may choose to do.  Students may also work on projects of their own choosing.  The class is designed to increase students' sewing skills and knowledge of sewing/serger machine operation.

A limited number of sewing machines, sergers, cutting mats, iron stations and quilter’s rulers are available in the classroom for student use. If you wish to use sergers, an introductory class in serging is a prerequisite.  If you are bringing your own machine, please make sure it is in good worked order (with power cord and accessories). If you will be using a rotary cutter, please bring that also.

If you will be in class all day, you may want to bring a bag lunch and beverage.

If you have any questions on the class or supplies, please contact instructors Joan Sachs at jpsachs13@gmail.com or cell # (920) 740-5278 or Ginger Dean at buzz87@new.rr.com or home # (920) 739-1395 or cell # (920) 585-1113.