Sewing, Basic Skills - 8 hr

Sewing, Basic Skills - 8 hr

0.2 Credits | Catalog Number: 60301604B

Introduces basic sewing construction techniques and how to operate a sewing machine to make simple garments such as skirts, tops, and pants.

18 out of 18 offerings found filtered offerings displayed
Available Online
FILTERS
Neenah Non-FVTC Campus
Oct 22-29, 2021
Fri 9:00AM - 1:00PM
In Person Classroom
$40.22
(62+) $36.65
Class Schedule
Date(s) Day/Time Room
Oct 22-29, 2021 Fri 9:00AM - 1:00PM Neenah-Lakeland University 158
Class number
53377
instructor
Connie Polley

Capacity
5 seats available
Books/Materials
Not Available
notes
Due to COVID-19 and social distancing requirements, in-person classes may be canceled or rescheduled. We will contact you if any changes occur.
Please see the notes below for a list of supplies needed for this class. Fox Valley Technical College reserves the right to cancel a class due to low enrollment up to two days in advance of the class start date and refunds will be given. Please take this into consideration when purchasing supplies needed for this class.
Thank you for registering for a Fox Valley Technical College class. It will be held at Lakeland University located at 2320 Industrial Drive in Neenah in Room 158. Students will be attending only the first two classes of a three day session class from 9:00 a.m. to 1:00 p.m. Required supplies: sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including desired pattern, pattern notions, fabric and thread to complete your project, sharp cutting shears, scissors for trimming, seam ripper, pins, pin cushion, small ruler, vinyl tape measure that is easy to read; needles, fabric scraps for testing stitches and pad of paper and pencil for note taking. Beginning students – sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including straight pins, measuring tape, scissors, chalk marking pencil, hem gauge or short ruler, a fabric placemat, 1-1/2 yard of 1/2” ribbon to coordinate with placemat, six gallon and six quart size zipper closure plastic bags, and coordinating thread to match placemat. Future projects will be discussed as class progresses. A limited number of sewing machines, sergers, cutting mats, iron stations and quilter’s rulers are available in the classroom for student use. If you wish to use sergers, an introductory class in serging is a prerequisite. If you have any questions on the class or supplies, please contact instructor Connie Polley at conniepolley@yahoo.com or (920) 205-3808.



MAP UNAVAILABLE
Neenah Non-FVTC Campus
Oct 22 - Nov 5, 2021
Multiple Schedules
In Person Classroom
$40.22
(62+) $36.65
Class Schedule
Date(s) Day/Time Room
Oct 22, 2021 Fri 9:00AM - 1:00PM Neenah-Lakeland University 158
Nov 5, 2021 Fri 9:00AM - 1:00PM Neenah-Lakeland University 158
Class number
53383
instructor
Connie Polley

Capacity
5 seats available
Books/Materials
Not Available
notes
Due to COVID-19 and social distancing requirements, in-person classes may be canceled or rescheduled. We will contact you if any changes occur.
Please see the notes below for a list of supplies needed for this class. Fox Valley Technical College reserves the right to cancel a class due to low enrollment up to two days in advance of the class start date and refunds will be given. Please take this into consideration when purchasing supplies needed for this class.
Thank you for registering for a Fox Valley Technical College class. It will be held at Lakeland University located at 2320 Industrial Drive in Neenah in Room 158. Students will be attending only the first and third classes of a three day session class from 9:00 a.m. to 1:00 p.m. Required supplies: sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including desired pattern, pattern notions, fabric and thread to complete your project, sharp cutting shears, scissors for trimming, seam ripper, pins, pin cushion, small ruler, vinyl tape measure that is easy to read; needles, fabric scraps for testing stitches and pad of paper and pencil for note taking. Beginning students – sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including straight pins, measuring tape, scissors, chalk marking pencil, hem gauge or short ruler, a fabric placemat, 1-1/2 yard of 1/2” ribbon to coordinate with placemat, six gallon and six quart size zipper closure plastic bags, and coordinating thread to match placemat. Future projects will be discussed as class progresses. A limited number of sewing machines, sergers, cutting mats, iron stations and quilter’s rulers are available in the classroom for student use. If you wish to use sergers, an introductory class in serging is a prerequisite. If you have any questions on the class or supplies, please contact instructor Connie Polley at conniepolley@yahoo.com or (920) 205-3808.



MAP UNAVAILABLE
Neenah Non-FVTC Campus
Oct 29 - Nov 5, 2021
Fri 9:00AM - 1:00PM
In Person Classroom
$40.22
(62+) $36.65
Class Schedule
Date(s) Day/Time Room
Oct 29 - Nov 5, 2021 Fri 9:00AM - 1:00PM Neenah-Lakeland University 158
Class number
53387
instructor
Connie Polley

Capacity
5 seats available
Books/Materials
Not Available
notes
Due to COVID-19 and social distancing requirements, in-person classes may be canceled or rescheduled. We will contact you if any changes occur.
Please see the notes below for a list of supplies needed for this class. Fox Valley Technical College reserves the right to cancel a class due to low enrollment up to two days in advance of the class start date and refunds will be given. Please take this into consideration when purchasing supplies needed for this class.
Thank you for registering for a Fox Valley Technical College class. It will be held at Lakeland University located at 2320 Industrial Drive in Neenah in Room 158. Students will be attending only the second and third classes of a three day session class from 9:00 a.m. to 1:00 p.m. Required supplies: sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including desired pattern, pattern notions, fabric and thread to complete your project, sharp cutting shears, scissors for trimming, seam ripper, pins, pin cushion, small ruler, vinyl tape measure that is easy to read; needles, fabric scraps for testing stitches and pad of paper and pencil for note taking. Beginning students – sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including straight pins, measuring tape, scissors, chalk marking pencil, hem gauge or short ruler, a fabric placemat, 1-1/2 yard of 1/2” ribbon to coordinate with placemat, six gallon and six quart size zipper closure plastic bags, and coordinating thread to match placemat. Future projects will be discussed as class progresses. A limited number of sewing machines, sergers, cutting mats, iron stations and quilter’s rulers are available in the classroom for student use. If you wish to use sergers, an introductory class in serging is a prerequisite. If you have any questions on the class or supplies, please contact instructor Connie Polley at conniepolley@yahoo.com or (920) 205-3808.



MAP UNAVAILABLE
Neenah Non-FVTC Campus
Nov 12 - Dec 3, 2021
Multiple Schedules
In Person Classroom
$40.22
(62+) $36.65
Class Schedule
Date(s) Day/Time Room
Nov 12, 2021 Fri 9:00AM - 1:00PM Neenah-Lakeland University 158
Dec 3, 2021 Fri 9:00AM - 1:00PM Neenah-Lakeland University 158
Class number
53384
instructor
Connie Polley

Capacity
3 seats available
Books/Materials
Not Available
notes
Due to COVID-19 and social distancing requirements, in-person classes may be canceled or rescheduled. We will contact you if any changes occur.
Please see the notes below for a list of supplies needed for this class. Fox Valley Technical College reserves the right to cancel a class due to low enrollment up to two days in advance of the class start date and refunds will be given. Please take this into consideration when purchasing supplies needed for this class.
Thank you for registering for a Fox Valley Technical College class. It will be held at Lakeland University located at 2320 Industrial Drive in Neenah in Room 158. Students will be attending only the first and third classes of a three day session class from 9:00 a.m. to 1:00 p.m. There will be no class on Friday, 11/26/21. Required supplies: sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including desired pattern, pattern notions, fabric and thread to complete your project, sharp cutting shears, scissors for trimming, seam ripper, pins, pin cushion, small ruler, vinyl tape measure that is easy to read; needles, fabric scraps for testing stitches and pad of paper and pencil for note taking. Beginning students – sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including straight pins, measuring tape, scissors, chalk marking pencil, hem gauge or short ruler, a fabric placemat, 1-1/2 yard of 1/2” ribbon to coordinate with placemat, six gallon and six quart size zipper closure plastic bags, and coordinating thread to match placemat. Future projects will be discussed as class progresses. A limited number of sewing machines, sergers, cutting mats, iron stations and quilter’s rulers are available in the classroom for student use. If you wish to use sergers, an introductory class in serging is a prerequisite. If you have any questions on the class or supplies, please contact instructor Connie Polley at conniepolley@yahoo.com or (920) 205-3808.



MAP UNAVAILABLE
Neenah Non-FVTC Campus
Nov 12-19, 2021
Fri 9:00AM - 1:00PM
In Person Classroom
$40.22
(62+) $36.65
Class Schedule
Date(s) Day/Time Room
Nov 12-19, 2021 Fri 9:00AM - 1:00PM Neenah-Lakeland University 158
Class number
53378
instructor
Connie Polley

Capacity
3 seats available
Books/Materials
Not Available
notes
Due to COVID-19 and social distancing requirements, in-person classes may be canceled or rescheduled. We will contact you if any changes occur.
Please see the notes below for a list of supplies needed for this class. Fox Valley Technical College reserves the right to cancel a class due to low enrollment up to two days in advance of the class start date and refunds will be given. Please take this into consideration when purchasing supplies needed for this class.
Thank you for registering for a Fox Valley Technical College class. It will be held at Lakeland University located at 2320 Industrial Drive in Neenah in Room 158. Students will be attending only the first two classes of a three day session class from 9:00 a.m. to 1:00 p.m. Required supplies: sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including desired pattern, pattern notions, fabric and thread to complete your project, sharp cutting shears, scissors for trimming, seam ripper, pins, pin cushion, small ruler, vinyl tape measure that is easy to read; needles, fabric scraps for testing stitches and pad of paper and pencil for note taking. Beginning students – sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including straight pins, measuring tape, scissors, chalk marking pencil, hem gauge or short ruler, a fabric placemat, 1-1/2 yard of 1/2” ribbon to coordinate with placemat, six gallon and six quart size zipper closure plastic bags, and coordinating thread to match placemat. Future projects will be discussed as class progresses. A limited number of sewing machines, sergers, cutting mats, iron stations and quilter’s rulers are available in the classroom for student use. If you wish to use sergers, an introductory class in serging is a prerequisite. If you have any questions on the class or supplies, please contact instructor Connie Polley at conniepolley@yahoo.com or (920) 205-3808.



MAP UNAVAILABLE
Neenah Non-FVTC Campus
Nov 19 - Dec 3, 2021
Multiple Schedules
In Person Classroom
$40.22
(62+) $36.65
Class Schedule
Date(s) Day/Time Room
Nov 19, 2021 Fri 9:00AM - 1:00PM Neenah-Lakeland University 158
Dec 3, 2021 Fri 9:00AM - 1:00PM Neenah-Lakeland University 158
Class number
53388
instructor
Connie Polley

Capacity
3 seats available
Books/Materials
Not Available
notes
Due to COVID-19 and social distancing requirements, in-person classes may be canceled or rescheduled. We will contact you if any changes occur.
Please see the notes below for a list of supplies needed for this class. Fox Valley Technical College reserves the right to cancel a class due to low enrollment up to two days in advance of the class start date and refunds will be given. Please take this into consideration when purchasing supplies needed for this class.
Thank you for registering for a Fox Valley Technical College class. It will be held at Lakeland University located at 2320 Industrial Drive in Neenah in Room 158. Students will be attending only the second and third classes of a three day session class from 9:00 a.m. to 1:00 p.m. There is no class scheduled for Friday, 11/26/21. Required supplies: sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including desired pattern, pattern notions, fabric and thread to complete your project, sharp cutting shears, scissors for trimming, seam ripper, pins, pin cushion, small ruler, vinyl tape measure that is easy to read; needles, fabric scraps for testing stitches and pad of paper and pencil for note taking. Beginning students – sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including straight pins, measuring tape, scissors, chalk marking pencil, hem gauge or short ruler, a fabric placemat, 1-1/2 yard of 1/2” ribbon to coordinate with placemat, six gallon and six quart size zipper closure plastic bags, and coordinating thread to match placemat. Future projects will be discussed as class progresses. A limited number of sewing machines, sergers, cutting mats, iron stations and quilter’s rulers are available in the classroom for student use. If you wish to use sergers, an introductory class in serging is a prerequisite. If you have any questions on the class or supplies, please contact instructor Connie Polley at conniepolley@yahoo.com or (920) 205-3808.



MAP UNAVAILABLE
Neenah Non-FVTC Campus
Feb 4-11, 2022
Fri 9:00AM - 1:00PM
In Person Lab
$40.22
(62+) $36.65
Class Schedule
Date(s) Day/Time Room
Feb 4-11, 2022 Fri 9:00AM - 1:00PM Neenah-Lakeland University 158
Class number
63246
instructor
Connie Polley

Capacity
Not Available
Books/Materials
Not Available
notes
Please see the notes below for a list of supplies needed for this class. Fox Valley Technical College reserves the right to cancel a class due to low enrollment up to two days in advance of the class start date and refunds will be given. Please take this into consideration when purchasing supplies needed for this class.
Thank you for registering for a Fox Valley Technical College class. It will be held at Lakeland University located at 2320 Industrial Drive in Neenah in Room 158. Students will be attending only the first two classes of a three day session class from 9:00 a.m. to 1:00 p.m. Required supplies: sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including desired pattern, pattern notions, fabric and thread to complete your project, sharp cutting shears, scissors for trimming, seam ripper, pins, pin cushion, small ruler, vinyl tape measure that is easy to read; needles, fabric scraps for testing stitches and pad of paper and pencil for note taking. Beginning students – sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including straight pins, measuring tape, scissors, chalk marking pencil, hem gauge or short ruler, a fabric placemat, 1-1/2 yard of 1/2” ribbon to coordinate with placemat, six gallon and six quart size zipper closure plastic bags, and coordinating thread to match placemat. Future projects will be discussed as class progresses. A limited number of sewing machines, sergers, cutting mats, iron stations and quilter’s rulers are available in the classroom for student use. If you wish to use sergers, an introductory class in serging is a prerequisite. If you have any questions on the class or supplies, please contact instructor Connie Polley at conniepolley@yahoo.com or (920) 205-3808.



MAP UNAVAILABLE
Neenah Non-FVTC Campus
Feb 4-18, 2022
Multiple Schedules
In Person Lab
$40.22
(62+) $36.65
Class Schedule
Date(s) Day/Time Room
Feb 4, 2022 Fri 9:00AM - 1:00PM Neenah-Lakeland University 158
Feb 18, 2022 Fri 9:00AM - 1:00PM Neenah-Lakeland University 158
Class number
63251
instructor
Connie Polley

Capacity
Not Available
Books/Materials
Not Available
notes
Please see the notes below for a list of supplies needed for this class. Fox Valley Technical College reserves the right to cancel a class due to low enrollment up to two days in advance of the class start date and refunds will be given. Please take this into consideration when purchasing supplies needed for this class.
Thank you for registering for a Fox Valley Technical College class. It will be held at Lakeland University located at 2320 Industrial Drive in Neenah in Room 158. Students will be attending only the first and third classes of a three day session class from 9:00 a.m. to 1:00 p.m. Required supplies: sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including desired pattern, pattern notions, fabric and thread to complete your project, sharp cutting shears, scissors for trimming, seam ripper, pins, pin cushion, small ruler, vinyl tape measure that is easy to read; needles, fabric scraps for testing stitches and pad of paper and pencil for note taking. Beginning students – sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including straight pins, measuring tape, scissors, chalk marking pencil, hem gauge or short ruler, a fabric placemat, 1-1/2 yard of 1/2” ribbon to coordinate with placemat, six gallon and six quart size zipper closure plastic bags, and coordinating thread to match placemat. Future projects will be discussed as class progresses. A limited number of sewing machines, sergers, cutting mats, iron stations and quilter’s rulers are available in the classroom for student use. If you wish to use sergers, an introductory class in serging is a prerequisite. If you have any questions on the class or supplies, please contact instructor Connie Polley at conniepolley@yahoo.com or (920) 205-3808.



MAP UNAVAILABLE
Neenah Non-FVTC Campus
Feb 11-18, 2022
Fri 9:00AM - 1:00PM
In Person Lab
$40.22
(62+) $36.65
Class Schedule
Date(s) Day/Time Room
Feb 11-18, 2022 Fri 9:00AM - 1:00PM Neenah-Lakeland University 158
Class number
63254
instructor
Connie Polley

Capacity
Not Available
Books/Materials
Not Available
notes
Please see the notes below for a list of supplies needed for this class. Fox Valley Technical College reserves the right to cancel a class due to low enrollment up to two days in advance of the class start date and refunds will be given. Please take this into consideration when purchasing supplies needed for this class.
Thank you for registering for a Fox Valley Technical College class. It will be held at Lakeland University located at 2320 Industrial Drive in Neenah in Room 158. Students will be attending only the second and third classes of a three day session class from 9:00 a.m. to 1:00 p.m. Required supplies: sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including desired pattern, pattern notions, fabric and thread to complete your project, sharp cutting shears, scissors for trimming, seam ripper, pins, pin cushion, small ruler, vinyl tape measure that is easy to read; needles, fabric scraps for testing stitches and pad of paper and pencil for note taking. Beginning students – sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including straight pins, measuring tape, scissors, chalk marking pencil, hem gauge or short ruler, a fabric placemat, 1-1/2 yard of 1/2” ribbon to coordinate with placemat, six gallon and six quart size zipper closure plastic bags, and coordinating thread to match placemat. Future projects will be discussed as class progresses. A limited number of sewing machines, sergers, cutting mats, iron stations and quilter’s rulers are available in the classroom for student use. If you wish to use sergers, an introductory class in serging is a prerequisite. If you have any questions on the class or supplies, please contact instructor Connie Polley at conniepolley@yahoo.com or (920) 205-3808.



MAP UNAVAILABLE
Neenah Non-FVTC Campus
Feb 25 - Mar 11, 2022
Multiple Schedules
In Person Lab
$40.22
(62+) $36.65
Class Schedule
Date(s) Day/Time Room
Feb 25, 2022 Fri 9:00AM - 1:00PM Neenah-Lakeland University 158
Mar 11, 2022 Fri 9:00AM - 1:00PM Neenah-Lakeland University 158
Class number
63252
instructor
Connie Polley

Capacity
Not Available
Books/Materials
Not Available
notes
Please see the notes below for a list of supplies needed for this class. Fox Valley Technical College reserves the right to cancel a class due to low enrollment up to two days in advance of the class start date and refunds will be given. Please take this into consideration when purchasing supplies needed for this class.
Thank you for registering for a Fox Valley Technical College class. It will be held at Lakeland University located at 2320 Industrial Drive in Neenah in Room 158. Students will be attending only the first and third classes of a three day session class from 9:00 a.m. to 1:00 p.m. Required supplies: sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including desired pattern, pattern notions, fabric and thread to complete your project, sharp cutting shears, scissors for trimming, seam ripper, pins, pin cushion, small ruler, vinyl tape measure that is easy to read; needles, fabric scraps for testing stitches and pad of paper and pencil for note taking. Beginning students – sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including straight pins, measuring tape, scissors, chalk marking pencil, hem gauge or short ruler, a fabric placemat, 1-1/2 yard of 1/2” ribbon to coordinate with placemat, six gallon and six quart size zipper closure plastic bags, and coordinating thread to match placemat. Future projects will be discussed as class progresses. A limited number of sewing machines, sergers, cutting mats, iron stations and quilter’s rulers are available in the classroom for student use. If you wish to use sergers, an introductory class in serging is a prerequisite. If you have any questions on the class or supplies, please contact instructor Connie Polley at conniepolley@yahoo.com or (920) 205-3808.



MAP UNAVAILABLE
Neenah Non-FVTC Campus
Feb 25 - Mar 4, 2022
Fri 9:00AM - 1:00PM
In Person Lab
$40.22
(62+) $36.65
Class Schedule
Date(s) Day/Time Room
Feb 25 - Mar 4, 2022 Fri 9:00AM - 1:00PM Neenah-Lakeland University 158
Class number
63247
instructor
Connie Polley

Capacity
Not Available
Books/Materials
Not Available
notes
Please see the notes below for a list of supplies needed for this class. Fox Valley Technical College reserves the right to cancel a class due to low enrollment up to two days in advance of the class start date and refunds will be given. Please take this into consideration when purchasing supplies needed for this class.
Thank you for registering for a Fox Valley Technical College class. It will be held at Lakeland University located at 2320 Industrial Drive in Neenah in Room 158. Students will be attending only the first two classes of a three day session class from 9:00 a.m. to 1:00 p.m. Required supplies: sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including desired pattern, pattern notions, fabric and thread to complete your project, sharp cutting shears, scissors for trimming, seam ripper, pins, pin cushion, small ruler, vinyl tape measure that is easy to read; needles, fabric scraps for testing stitches and pad of paper and pencil for note taking. Beginning students – sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including straight pins, measuring tape, scissors, chalk marking pencil, hem gauge or short ruler, a fabric placemat, 1-1/2 yard of 1/2” ribbon to coordinate with placemat, six gallon and six quart size zipper closure plastic bags, and coordinating thread to match placemat. Future projects will be discussed as class progresses. A limited number of sewing machines, sergers, cutting mats, iron stations and quilter’s rulers are available in the classroom for student use. If you wish to use sergers, an introductory class in serging is a prerequisite. If you have any questions on the class or supplies, please contact instructor Connie Polley at conniepolley@yahoo.com or (920) 205-3808.



MAP UNAVAILABLE
Neenah Non-FVTC Campus
Mar 4-11, 2022
Fri 9:00AM - 1:00PM
In Person Lab
$40.22
(62+) $36.65
Class Schedule
Date(s) Day/Time Room
Mar 4-11, 2022 Fri 9:00AM - 1:00PM Neenah-Lakeland University 158
Class number
63255
instructor
Connie Polley

Capacity
Not Available
Books/Materials
Not Available
notes
Please see the notes below for a list of supplies needed for this class. Fox Valley Technical College reserves the right to cancel a class due to low enrollment up to two days in advance of the class start date and refunds will be given. Please take this into consideration when purchasing supplies needed for this class.
Thank you for registering for a Fox Valley Technical College class. It will be held at Lakeland University located at 2320 Industrial Drive in Neenah in Room 158. Students will be attending only the second and third classes of a three day session class from 9:00 a.m. to 1:00 p.m. Required supplies: sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including desired pattern, pattern notions, fabric and thread to complete your project, sharp cutting shears, scissors for trimming, seam ripper, pins, pin cushion, small ruler, vinyl tape measure that is easy to read; needles, fabric scraps for testing stitches and pad of paper and pencil for note taking. Beginning students – sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including straight pins, measuring tape, scissors, chalk marking pencil, hem gauge or short ruler, a fabric placemat, 1-1/2 yard of 1/2” ribbon to coordinate with placemat, six gallon and six quart size zipper closure plastic bags, and coordinating thread to match placemat. Future projects will be discussed as class progresses. A limited number of sewing machines, sergers, cutting mats, iron stations and quilter’s rulers are available in the classroom for student use. If you wish to use sergers, an introductory class in serging is a prerequisite. If you have any questions on the class or supplies, please contact instructor Connie Polley at conniepolley@yahoo.com or (920) 205-3808.



MAP UNAVAILABLE
Neenah Non-FVTC Campus
Mar 18 - Apr 1, 2022
Multiple Schedules
In Person Lab
$40.22
(62+) $36.65
Class Schedule
Date(s) Day/Time Room
Mar 18, 2022 Fri 9:00AM - 1:00PM Neenah-Lakeland University 158
Apr 1, 2022 Fri 9:00AM - 1:00PM Neenah-Lakeland University 158
Class number
63253
instructor
Connie Polley

Capacity
Not Available
Books/Materials
Not Available
notes
Please see the notes below for a list of supplies needed for this class. Fox Valley Technical College reserves the right to cancel a class due to low enrollment up to two days in advance of the class start date and refunds will be given. Please take this into consideration when purchasing supplies needed for this class.
Thank you for registering for a Fox Valley Technical College class. It will be held at Lakeland University located at 2320 Industrial Drive in Neenah in Room 158. Students will be attending only the first and third classes of a three day session class from 9:00 a.m. to 1:00 p.m. Required supplies: sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including desired pattern, pattern notions, fabric and thread to complete your project, sharp cutting shears, scissors for trimming, seam ripper, pins, pin cushion, small ruler, vinyl tape measure that is easy to read; needles, fabric scraps for testing stitches and pad of paper and pencil for note taking. Beginning students – sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including straight pins, measuring tape, scissors, chalk marking pencil, hem gauge or short ruler, a fabric placemat, 1-1/2 yard of 1/2” ribbon to coordinate with placemat, six gallon and six quart size zipper closure plastic bags, and coordinating thread to match placemat. Future projects will be discussed as class progresses. A limited number of sewing machines, sergers, cutting mats, iron stations and quilter’s rulers are available in the classroom for student use. If you wish to use sergers, an introductory class in serging is a prerequisite. If you have any questions on the class or supplies, please contact instructor Connie Polley at conniepolley@yahoo.com or (920) 205-3808.



MAP UNAVAILABLE
Neenah Non-FVTC Campus
Mar 18-25, 2022
Fri 9:00AM - 1:00PM
In Person Lab
$40.22
(62+) $36.65
Class Schedule
Date(s) Day/Time Room
Mar 18-25, 2022 Fri 9:00AM - 1:00PM Neenah-Lakeland University 158
Class number
63248
instructor
Connie Polley

Capacity
Not Available
Books/Materials
Not Available
notes
Please see the notes below for a list of supplies needed for this class. Fox Valley Technical College reserves the right to cancel a class due to low enrollment up to two days in advance of the class start date and refunds will be given. Please take this into consideration when purchasing supplies needed for this class.
Thank you for registering for a Fox Valley Technical College class. It will be held at Lakeland University located at 2320 Industrial Drive in Neenah in Room 158. Students will be attending only the first two classes of a three day session class from 9:00 a.m. to 1:00 p.m. Required supplies: sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including desired pattern, pattern notions, fabric and thread to complete your project, sharp cutting shears, scissors for trimming, seam ripper, pins, pin cushion, small ruler, vinyl tape measure that is easy to read; needles, fabric scraps for testing stitches and pad of paper and pencil for note taking. Beginning students – sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including straight pins, measuring tape, scissors, chalk marking pencil, hem gauge or short ruler, a fabric placemat, 1-1/2 yard of 1/2” ribbon to coordinate with placemat, six gallon and six quart size zipper closure plastic bags, and coordinating thread to match placemat. Future projects will be discussed as class progresses. A limited number of sewing machines, sergers, cutting mats, iron stations and quilter’s rulers are available in the classroom for student use. If you wish to use sergers, an introductory class in serging is a prerequisite. If you have any questions on the class or supplies, please contact instructor Connie Polley at conniepolley@yahoo.com or (920) 205-3808.



MAP UNAVAILABLE
Neenah Non-FVTC Campus
Mar 25 - Apr 1, 2022
Fri 9:00AM - 1:00PM
In Person Lab
$40.22
(62+) $36.65
Class Schedule
Date(s) Day/Time Room
Mar 25 - Apr 1, 2022 Fri 9:00AM - 1:00PM Neenah-Lakeland University 158
Class number
63256
instructor
Connie Polley

Capacity
Not Available
Books/Materials
Not Available
notes
Please see the notes below for a list of supplies needed for this class. Fox Valley Technical College reserves the right to cancel a class due to low enrollment up to two days in advance of the class start date and refunds will be given. Please take this into consideration when purchasing supplies needed for this class.
Thank you for registering for a Fox Valley Technical College class. It will be held at Lakeland University located at 2320 Industrial Drive in Neenah in Room 158. Students will be attending only the second and third classes of a three day session class from 9:00 a.m. to 1:00 p.m. Required supplies: sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including desired pattern, pattern notions, fabric and thread to complete your project, sharp cutting shears, scissors for trimming, seam ripper, pins, pin cushion, small ruler, vinyl tape measure that is easy to read; needles, fabric scraps for testing stitches and pad of paper and pencil for note taking. Beginning students – sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including straight pins, measuring tape, scissors, chalk marking pencil, hem gauge or short ruler, a fabric placemat, 1-1/2 yard of 1/2” ribbon to coordinate with placemat, six gallon and six quart size zipper closure plastic bags, and coordinating thread to match placemat. Future projects will be discussed as class progresses. A limited number of sewing machines, sergers, cutting mats, iron stations and quilter’s rulers are available in the classroom for student use. If you wish to use sergers, an introductory class in serging is a prerequisite. If you have any questions on the class or supplies, please contact instructor Connie Polley at conniepolley@yahoo.com or (920) 205-3808.



MAP UNAVAILABLE
Neenah Non-FVTC Campus
Apr 8-22, 2022
Multiple Schedules
In Person Lab
$40.22
(62+) $36.65
Class Schedule
Date(s) Day/Time Room
Apr 8, 2022 Fri 9:00AM - 1:00PM Neenah-Lakeland University 158
Apr 22, 2022 Fri 9:00AM - 1:00PM Neenah-Lakeland University 158
Class number
63267
instructor
Connie Polley

Capacity
Not Available
Books/Materials
Not Available
notes
Please see the notes below for a list of supplies needed for this class. Fox Valley Technical College reserves the right to cancel a class due to low enrollment up to two days in advance of the class start date and refunds will be given. Please take this into consideration when purchasing supplies needed for this class.
Thank you for registering for a Fox Valley Technical College class. It will be held at Lakeland University located at 2320 Industrial Drive in Neenah in Room 158. Students will be attending only the first two classes of a three day session class from 9:00 a.m. to 1:00 p.m. Required supplies: sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including desired pattern, pattern notions, fabric and thread to complete your project, sharp cutting shears, scissors for trimming, seam ripper, pins, pin cushion, small ruler, vinyl tape measure that is easy to read; needles, fabric scraps for testing stitches and pad of paper and pencil for note taking. Beginning students – sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including straight pins, measuring tape, scissors, chalk marking pencil, hem gauge or short ruler, a fabric placemat, 1-1/2 yard of 1/2” ribbon to coordinate with placemat, six gallon and six quart size zipper closure plastic bags, and coordinating thread to match placemat. Future projects will be discussed as class progresses. A limited number of sewing machines, sergers, cutting mats, iron stations and quilter’s rulers are available in the classroom for student use. If you wish to use sergers, an introductory class in serging is a prerequisite. If you have any questions on the class or supplies, please contact instructor Connie Polley at conniepolley@yahoo.com or (920) 205-3808.



MAP UNAVAILABLE
Neenah Non-FVTC Campus
Apr 8-29, 2022
Multiple Schedules
In Person Lab
$40.22
(62+) $36.65
Class Schedule
Date(s) Day/Time Room
Apr 8, 2022 Fri 9:00AM - 1:00PM Neenah-Lakeland University 158
Apr 29, 2022 Fri 9:00AM - 1:00PM Neenah-Lakeland University 158
Class number
63268
instructor
Connie Polley

Capacity
Not Available
Books/Materials
Not Available
notes
Please see the notes below for a list of supplies needed for this class. Fox Valley Technical College reserves the right to cancel a class due to low enrollment up to two days in advance of the class start date and refunds will be given. Please take this into consideration when purchasing supplies needed for this class.
Thank you for registering for a Fox Valley Technical College class. It will be held at Lakeland University located at 2320 Industrial Drive in Neenah in Room 158. Students will be attending only the first and third classes of a three day session class from 9:00 a.m. to 1:00 p.m. Required supplies: sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including desired pattern, pattern notions, fabric and thread to complete your project, sharp cutting shears, scissors for trimming, seam ripper, pins, pin cushion, small ruler, vinyl tape measure that is easy to read; needles, fabric scraps for testing stitches and pad of paper and pencil for note taking. Beginning students – sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including straight pins, measuring tape, scissors, chalk marking pencil, hem gauge or short ruler, a fabric placemat, 1-1/2 yard of 1/2” ribbon to coordinate with placemat, six gallon and six quart size zipper closure plastic bags, and coordinating thread to match placemat. Future projects will be discussed as class progresses. A limited number of sewing machines, sergers, cutting mats, iron stations and quilter’s rulers are available in the classroom for student use. If you wish to use sergers, an introductory class in serging is a prerequisite. If you have any questions on the class or supplies, please contact instructor Connie Polley at conniepolley@yahoo.com or (920) 205-3808.



MAP UNAVAILABLE
Neenah Non-FVTC Campus
Apr 22-29, 2022
Fri 9:00AM - 1:00PM
In Person Lab
$40.22
(62+) $36.65
Class Schedule
Date(s) Day/Time Room
Apr 22-29, 2022 Fri 9:00AM - 1:00PM Neenah-Lakeland University 158
Class number
63269
instructor
Connie Polley

Capacity
Not Available
Books/Materials
Not Available
notes
Please see the notes below for a list of supplies needed for this class. Fox Valley Technical College reserves the right to cancel a class due to low enrollment up to two days in advance of the class start date and refunds will be given. Please take this into consideration when purchasing supplies needed for this class.
Thank you for registering for a Fox Valley Technical College class. It will be held at Lakeland University located at 2320 Industrial Drive in Neenah in Room 158. Students will be attending only the second and third classes of a three day session class from 9:00 a.m. to 1:00 p.m. Required supplies: sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including desired pattern, pattern notions, fabric and thread to complete your project, sharp cutting shears, scissors for trimming, seam ripper, pins, pin cushion, small ruler, vinyl tape measure that is easy to read; needles, fabric scraps for testing stitches and pad of paper and pencil for note taking. Beginning students – sewing machine in good working condition including operator instruction manual, power cord and accessories, basic sewing supplies including straight pins, measuring tape, scissors, chalk marking pencil, hem gauge or short ruler, a fabric placemat, 1-1/2 yard of 1/2” ribbon to coordinate with placemat, six gallon and six quart size zipper closure plastic bags, and coordinating thread to match placemat. Future projects will be discussed as class progresses. A limited number of sewing machines, sergers, cutting mats, iron stations and quilter’s rulers are available in the classroom for student use. If you wish to use sergers, an introductory class in serging is a prerequisite. If you have any questions on the class or supplies, please contact instructor Connie Polley at conniepolley@yahoo.com or (920) 205-3808.



MAP UNAVAILABLE
No scheduled offerings were found based on the filters you selected.

Want to receive an email when the next community registration period begins?


 

Keep Me Posted!

Sign up to be notified about new classes and registration dates at FVTC.


SUCCESS!

We will send an email when registration is open.

Done